Visioneer XP220 User's Guide download pdf (Page 21)

14 VISIONEER STROBE XP 220 SCANNER USER’S GUIDE

The USB symbol, as seen in the above diagram, identifies the

location of the USB port on your computer. If the plug does not

attach easily, make sure that you are plugging it in correctly. Do not

force the plug into the connection.

You can also connect the scanner to a USB hub. The USB hub

must have its own power supply already plugged into an electrical

outlet.

If you are using Windows XP Service Pack 2, and have plugged the

USB cable into a USB 1.1 port, an information bubble may open

explaining that “A HI-SPEED USB device is plugged into a non-

HI-SPEED USB hub”. Plug the USB cable into a USB 2.0 port (if

available) or just disregard the message. If you leave it plugged into

the USB 1.1 port, your scanner may scan a bit slower.

4. Your computer recognizes that a scanner has been plugged into the

USB port and loads the appropriate software to run the scanner.

5. The window for calibrating the scanner will open. Proceed to

“Step 3: Calibrate the Scanner” on page 15.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 171 172

No comments

Visioneer XP220 User's Guide Page 21