Visioneer STROBE 450 User Manual download pdf (Page 84)

REPLACE THE ADF PAD ASSEMBLY 79

4. Wipe the ADF pad from top to bottom. Be careful not to snag the

cloth on the springs on either side of the pad.

5. Close the cover when you’re finished.

REPLACE THE ADF PAD ASSEMBLY

The ADF pad will wear out and is designed to be a user-replaceable part.

Problems with documents feeding into the ADF is an indication that the

pad is wearing thin.

You received a replacement pad in the original scanner box, and you can

also order a new one. See the “Visioneer Strobe XP 450 Scanner Parts List”

on page 86 for ordering information.

1. Press the ADF cover release on the top left of the scanner body to open

the Automatic Document Feeder cover.

2. The ADF pad is located in the top of the scanner.

3. Squeeze the plastic clamps that hold the pad assembly in place and lift

the pad up and out.

4. Reverse the procedure to replace the new pad into its slots.

5. Close the cover when you’re finished.

Note: Please be careful when cleaning the roller. The roller is designed to

rotate in one direction only. As you’re cleaning the roller, make sure it

rotates easily, and continue rotating it in that direction while wiping it

clean. Do NOT force the roller to rotate in the opposite direction.

Forcing the roller to rotate will damage it, and may cause the scanner to

feed pages incorrectly.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 93 94

No comments

Visioneer STROBE 450 User Manual Page 84